Aeroneb Solo System, Instruction Manual

Page: 34 / 56

28 Aeroneb
®
Solo System Instruction Manual
Nebulization
For intermittent doses less than or equal to 6mL.
1. To start a 30 minute nebulization cycle, add the
medication and press and release the blue on/off power
button (Figure 17). The green 30 Min. indicator LED
illuminates to indicate that the 30 minute nebulization
cycle is in progress.
For continuous doses:
WARNING: To ensure correct and safe connection between
the nebulizer and the medication reservoir, trace the
medication tube from the nebulizer back to the medication
reservoir to make sure the medication tube is connected to
the correct source.
2. To start a continuous nebulization cycle, connect the
continuous nebulization tube set to the nebulizer.
Insert the syringe into the syringe pump and set the
appropriate flow rate. On the control module press and
hold the blue On/Off power button for at least three
seconds. The green continuous nebulization cycle is in
progress.
3. To stop the nebulizer at any time, press the on/off
power button. The indicator turns off to indicate that
nebulization has stopped.
Caution: When delivering a continuous dose select the
continuous cycle. This will only operate on mains power.