5
Section 2. SET UP PROCEDURE
The set up procedure should be carried out on a clean, non-abrasive
surface.
ATTENTION:
After each set up procedure you must perform a preflight
inspection of the glider.
2.1. Take the speedbar out of the bag, spread the uprights. Install the
speedbar. Pass the flap’s and RVG’s ropes through channels in the speedbar
and the stoppers. Fix the speedbar using the quick-pins. Hook front wire.
2.2. Rest the glider on the control bar, put the bags inside the D-spar, take
the pin of the nose hardware out, spread the wings (don’t take the bags off
the D-spar ends), remove Velcro tapes.
