7
2.4. Nose unit connection
•
Put out the keel tube stinger
•
Open wings as far as possible – hardware at nose must join. If the nose
ear does not match into the nose fork, turn left and right keel beam to
adjust position of the ear, corresponding to the fork
•
Insert nose pin. To do this, stand at the keel beam side, moving the keel
beam slightly
•
•
Insert safety ring into the nose pin. Insert nose tube and secure it with
the nose pin ring.
•
•
Put in the keel tube stinger
2.5. Install left and right trailing edge tube on the keel tube
