11
2.12. SPADD installation:
•
Put it on the pin on the tip rib
•
Put out the tip tube and insert Quick Pin on other end
•
Put in the tip tube.
The pin on SPADD’s aileron side must be above the aileron’s pick-up
bracket
2.12.Side wires connection:
•
Insert side wire end plate into the slot at the middle of upright and fix it
with Quick Pin
•
There must be small slack on side wires with RWG off, if they are tighten
too much you must check if side wire freely go through the pulleys or
blocked some were
2.13.Install nose and back cover
