Glue 5×5 mm balsa stripwood 12 to lower front
fuselage sheeting 10 (2 mm balsa) as shown.
17
Slightly bevel rear end of lower front
fuselage sheeting and fit sheeting in
place.
18
Glue doubled-up motor mount 2 in place together with lower
fuselage sheeting 10 and secure with tape until dry. Then glue
in place remaining 5×5 mm balsa stripwood.
Attention:
The rectangular cutout in motor mount 2 needs
to face upward!
19
Trim stripwood flush with front of motor
mount and sand lightly. Glue part 7 in
place and secure with tape.
20
10
12
12
2
7
Summary of Contents for Quido
Page 1: ...aero naut Order No 1303 00 Electric Model Aeroplane Quido...
Page 23: ......
