6
INRLPY. 02.10 4086916_01
1. GENERAL
WARNINGS
Standards and directives to
be followed in the design and
manufacture of the unit:
Safety system:
Machine Directive
2006/42/EC
Low voltage directive
LVD 2006/95/EC
Electromagnetic compatibility
directive
EMC 2004/108/EC
Pressure containers directive
PED 97/23/CE EN 378,
UNI EN 14276
Electrical part:
EN 60204-1
Protection rating
IP 24
Acoustic part:
SOUND POWER
(EN ISO 9614-2)
SOUND PRESSURE
(EN ISO 3744)
Certifications
:
Eurovent
Refrigerant GAS:
This unit contains fluorinated
greenhouse gases covered by
the Kyoto Protocol.
Maintenance and disposal
operations must be only
carried out by qualified staff.
R410A GWP=1900
The AERMEC NRL units are built
according to the recognised standards
and safety regulations. They have
been designed for air conditioning
and production of hot water and
must be used for this purpose in
accordance with their performance
characteristics. The company shall not
be contractually or non-contractually
liable for any damage to people,
animals or objects, for failures caused
by errors during installation, adjustment
and maintenance or incorrect use. All
the uses not expressly indicated in this
manual are not allowed.
1.1. CONSERVING
THE
DOCUMENTATION
Deliver the following instructions plus all
the complementary documentation to
the system user, who shall be responsible
for keeping the instructions so that they
are always available when needed.
Read carefully this chapter; all the
procedures must be carried out by
qualified personnel according to the
regulations in force in the different
countries(M.D. 329/2004).
It must be installed in such a way as to
make all maintenance and/or repair
operations possible (SEE INSTALLER
SECTION page 33).
The warranty of the device does not in
any case cover costs owing to ladder
trucks, lifts or other lifting systems that
may be required in order to carry out
the interventions under guarantee.
Do not modify or tamper the with chiller
as this may cause dangerous situations
and the manufacturer shall not be liable
for any damages. The warranty shall not
be valid if the indications mentioned
above are not observed.
1.2.
SAFETY PRECAUTIONS AND
INSTALLATION
−
the chiller must be installed by an
authorised and qualified technician,
in compliance with the national
legislation in force in the country of
destination (MD 329/2004).
Aermec shall not be held
responsible for any damage
whatsoever resulting from the non-
compliance with these instructions.
−
Before starting any kind of work, it is
necessary TO READ CAREFULLY THE
INSTRUCTIONS, AND TO PERFORM
THE SAFETY CHECKS TO AVOID ANY
RISKS. All the personnel in charge
must know the operations and the
risks that may arise when all the unit
installation operations begin.
Summary of Contents for NRL
Page 2: ......
