27
• Pressing the L button will operate the Backlight.
• Depressing and holding the M button for 2 seconds will
revert to the Watch Default Time screen (MAIN or ALT).
• Depressing both the A and S buttons simultaneously for 2
seconds will access the Set Watch CDT screen indicated
by the graphics TIMR and SEt, TIME icon, and Hour Set
Point flashing (Fig. 16).
> If no button is pressed during a period of 2 minutes, the
unit will revert to the Watch Default Time screen.
• Pressing and releasing the A button momentarily (< 2
seconds) while the Hour Set Point is flashing will step
upward through the Set Points in 1 Hour increments from
0: to 23: (hr).
• Depressing and holding the S button while the Hour Set Point is flashing will
scroll upward through the Set Points at a rate of 8 per second.
• Pressing and releasing the M button momentarily (< 2 seconds) will step
back through the Set Points in 1 Hour decrements.
• Pressing and releasing the A button momentarily (< 2 seconds) will save the
Hour Set Point and/or advance to Set Minutes with the Minutes digits
flashing.
• Pressing and releasing the S button momentarily (< 2 seconds) while the
Minute Set Point is flashing will step upward through the Set Points in 1
Minute increments from :00 to :59 (min).
• Depressing and holding the S button while the Minute Set Point is flashing
will scroll upward through the Set Points at a rate of 8 per second.
• Pressing and releasing the M button momentarily (< 2 seconds) will step
back through the Set Points in 1 Minute decrements.
Fig. 16 - SET WATCH
CDT
Summary of Contents for F10
