Aeris F10, Operating Manual

Page: 46 / 84

46
SURFACE SET MODES
Set Mode Sequence:
SURF MAIN >> SET A >> SET U >> SN (serial number)
Access and step through of the sequence is gained by repeated simultaneous 2
second presses of the A and S buttons.
SET A (Alarms) and SET U (Utilities) Set Points can also be changed using the PC
Settings Upload portion of the ACI PC Interface program.
SET A GROUP (ALARMS)
Set A Sequence:
AUD >> SRT >> EDT >> RDI >> DD 1 >> DD 2 >> DD 3
• Depressing the A and S buttons simultaneously for 2 seconds while the SURF
MAIN screen is displayed will access the Set A screen (Fig. 43).
> Settings remain at the values set until changed.
The Set AUD feature provides complete OFF control of the
Audible and its associated red LED warning light. When AUD
is set OFF, no beeps will be emitted and the light will not flash
when an alarm condition occurs, which some divers prefer
during select activities. Icons and messages will still flash and
the Backlight will still come On.
Fig. 43 - SET A