Aeris F10 Operating Manual Download

Page: 79 / 84

GLOSSARY

Audible Alarm

- A gauge emitted tone that alerts the diver to potential danger.

Depth Sensor

- An electro-mechanical device that converts water pressure into an electrical

signal, that is converted to a visual depth display.

Display

- A visual readout of information.

Dive Log Mode

- A gauge display of recorded dive information.

Elapsed Dive Time

- The total time spent underwater during a dive between 4 FT (1.2 M) on

initial descent to 2 FT (0.6 M) on final ascent.

Graphic Diver Interface

™

- Feature of AERIS digital gauges that indicate the diver's status

(bar graphics, icons, graphic displays).

Icon

- A small pictorial representation of an operational mode or information.

LCD

- Abbreviation for liquid crystal display, an easily viewed low voltage display usually found

on dive computers

Maximum Depth

- The deepest depth attained during a dive.

Mode

- A specific set of functions in a digital gauge.

Out of Range

- The point at which a dive gauge can no longer supply correct dive informa-

tion.

Transducer

- An electro-mechanical device in a dive gauge that acts as a depth sensor.

Summary of Contents for F10





















































































Search results

Summary of Contents for F10

Reviews:

Related manuals for F10

Brands by name

Popular brands

Aeris F10, Operating Manual

Search results

Summary of Contents for F10

Reviews:

Related manuals for F10

Brands by name

Popular brands