13/28
TF6751_D
Aereco S.A.
3.7.
Installing the fan
1) Ensure the proper adaptation of the fan on its stack (see section above).
The plate holding the outlet Ø350 mm can be designed with 3 crimped M8 nuts positioned as shown below
to allow the attachment of the fan.
2) Remove the fan from the pallet.
▪
Use only the 2 handles located under the uprights to handle the fan.
▪
Wear suitable gloves (some of the metal parts may be sharp)
▪
Do not set the fan down on an obstacle that might damage the turbine.
▪
Do not lay the fan flat (horizontally)
