2 / 36
TF6775_A_NOT_DXR230_REFERENCE
Aereco S.A.
1. Introduction
3
1.1. Warnings
3
1.2. Pictograms
3
2. Description
4
2.1. General information
4
2.2. Construction / Dimensions
6
2.3. DXR Assembling
6
3. Installation
7
3.1. Location of the installation
7
3.2. DXR Unit
7
3.2.1. Location
7
3.2.2. Accessibility
8
3.2.3. Fixing of the DXR Unit
9
3.2.4. Duct connections to the DXR Unit
10
3.2.5. Evacuation of condensates
11
3.3. Defrosting (optional)
12
3.4. Smart interface
13
3.5. 2I2O module
13
3.6. Special care for the ductwork
14
3.7. Fire protection
14
4. Electrical connections
15
4.1. Electrical connection on the DXR Unit
16
4.2. Electrical connection of the defrosting
17
4.3. Electrical connection of the condensate pump for DXR1708
17
5. Starting and settings of the DXR system
18
5.1. Ways to access to the interface
18
5.2. DXR Home page
19
5.3. First start
21
5.4. How to bring up to date the versioning
21
6. Maintenance
22
6.1. Regular maintenance of the installation
22
6.2. Power supply and motor material protections
22
6.3. Filters
23
7. Troubleshooting
25
8. Acceptance of works
26
8.1. Visual inspection
26
8.2. Measurements
26
9. Specific recommendations for airtightness and insulation of the installation
27
9.1. Insulation of the installation
28
9.2. Airtightness of the installation
28
10. Supply and exhaust units
30
10.1. Supply units / exhaust grilles
31
10.2. Fresh air inlet and exhaust air outlet
31
11. Environmental concerns
32
12. Warranty
32
13. Conformity and standard
32
14. Characteristics
33