6 / 36
TF6775_A_NOT_DXR230_REFERENCE
Aereco S.A.
2.2. CONSTRUCTION /DIMENSIONS
DXR Unit 230 m
3
/h – Heat recovery unit
See the characteristics of the DXR Unit system on page 33
·Envelope in galvanised steel
·2 low energy consumption fans driven by EC electronic motors (supply air and exhaust air).
·F7 anti pollen filter for the fresh air.
·Exhaust G4 filters to protect fans and the exchanger.
·Continously checking of filter clogging, and warning for filter change.
·High efficiency heat exchanger with aluminium plates, washable.
·Intelligent electronic control unit of the heat recovery, with control interface.
·Integrated bypass and free cooling automatically controlled.
·Flexible duct to drain condensate.
2.3. DXR ASSEMBLING
When delivered, the DXR unit is furnished with 4 spigots with 4 screws each.
Those 4 spigots have to be screwed and sealed to the DXR unit as indicated on
the scheme.
The seal can be made thanks to silicone seal.
Assembling of the DXR spigots
Following the seal applied on the DXR Unit, a drying time has
to be taken into account before the operability of the DXR.
Dimensions of DXR Unit (mm)
140
1160
124
158
246 258
1260
140
328
328
714
650
DN1
60
DN
16
0
316
125
