background image

 

 

4.2 Weather forecasting   

 

Sunny          Partly Cloudy      Cloudy              Rain

 
The four weather icons Sunny, Partly Cloudy, Cloudy and Rainy represent the short range (12-24 hours) 
weather  forecast.  The  weather  station  uses  air  pressure  patterns  to  predict  the  most  likely  upcoming 
weather, which can be quite different to the weather conditions  you are experiencing at the time (i.e. the 
forecast is not an indicator of current conditions, just look outside for that).   

 
4.3 Weather tendency indicator 

The  weather  tendency  indicator  arrows  are  located  between  the  weather  icons  to show  the  air  pressure 
tendency and provide a forecast of the weather to be expected due to increasing or decreasing air pressure. 
The  rightward  arrow  means  that  the  air  pressure  is  increasing  and  the  weather  is  expected  to  become 
better.  The  leftward  arrow  means  that  the  air  pressure  is  decreasing  and  the  weather  is  expected  to 
become worse. 
 
The change of the weather forecast icon is based on the relationship between current relative pressure and 
the pressure change within the last twelve hours. If the weather is changing, the weather tendency indicator 
(animated arrows) will be flashing. If after a three hour period the weather conditions have become stable, 
the arrows will fix indicating a stable condition.   
 

4.4 Examples of changing weather icons: 

 

         

 

 

4.5 Storm warning indicator 

 

The  storm  threshold 

can  be  set  to  suit  the  user’s  requirements  for  storm  forecasting  -  anywhere  from 

5-9hPa (default 4hPa). When there is a fall below the pressure threshold within any given 3 hour period the 
clouds  with  rain  icon  as  well  as  the  tendency  arrows  will  flash  for  3  hours  indicating  the  storm  warning 
feature has been activated. 

 

Notes on the pressure sensitivity setting for weather forecasting: 

 

The pressure threshold can be set to suit the user’s requirements for weather forecasting - anywhere from 
2-4hPa  (default  2hPa).  Areas  that  experience  frequent  changes  in  air  pressure  require  a  higher  setting 
compared to areas where the air pressure is more stable. For example if 4hPa is selected, then there must 
be a fall or rise in air pressure of at least 4hPa before the weather station will register this as a change in 
weather. 
 

5.  Program Mode 

The base station has five keys for easy operation: the 

SET

 key, 

ALARM

 key,

 MIN/MAX

 key 

+

 key and the 

SNOOZE/LIGHT

  key.  There  are  four  program  modes  available:  Quick  Display  Mode,  Setting  Mode, 

Alarm Mode and Min/Max Mode.

 

 
The program mode can be exited at any time by either pressing the 

SNOOZE/LIGHT

 key or waiting for 

the 10-second time-out to take effect. 
 
 

 

Summary of Contents for WS1173












Reviews: