background image

WEA23 – Weather

eye

 Indoor/Outdoor Weather Station 

Operation Instructions 

 

. Functions Overview 

1.  Four weather forecast conditions: sunny, patchy clouds, overcast and 

rain. 

2.  Indoor temperature: range of 0

--50

, updates every 12 seconds. 

3.  Indoor humidity: recorded range between 20% to 95%. 
4.  Trend indication of indoor and outdoor temperature/humidity. 
5.  Max/min records for indoor/outdoor temperature and humidity. 
6.  Upper/lower limit alarm for outdoor temperature. 
7. Comfort 

index 

8.  Alarm plus 5 minute snooze. 
9. Low 

battery 

indication. 

10. Moon Phase. 

 

 

 

. Turning on for the first time, changing battery and resetting 

1.  Insert the batteries into the outside sensor first, then the main unit. 
2.  The display will light up for 3 seconds.  When replacing the battery or if 

resetting the unit, then it will beep before receiving the radio signal. The unit 
will search for 3 minutes to test temperature and humidity, 

3.  The calendar default setting is 0:00 at Jan 1st, 2000. 
4.  The alarm default setting is 0:00 if set. 
5.  The initial forecast symbol shows as patchy clouds. 

6.  Temperature defaults to display in 

℃ 

and time format defaults to 24HR. 

Summary of Contents for WEA23

Page 1: ... Comfort index 8 Alarm plus 5 minute snooze 9 Low battery indication 10 Moon Phase Ⅱ Turning on for the first time changing battery and resetting 1 Insert the batteries into the outside sensor first then the main unit 2 The display will light up for 3 seconds When replacing the battery or if resetting the unit then it will beep before receiving the radio signal The unit will search for 3 minutes t...

Page 2: ...to set 4 Press UP to change between 12HR 24HR time formats 5 Press DOWN to change between 6 When ALARM sounds press snooze and alarm will sound again after 5 minutes 7 Press Channel to change the RF CH1 CH2 CH3 8 Hold Channel for 2 seconds to reset saved data from the outdoor sensor 9 Press Alert to turn temperature alarm on off 10 Hold Alert for 2 seconds to set temperature alarm 11 Press MAX MIN...

Page 3: ...ing input 6 Press Alert to confirm and to go to the next setting 7 Press UP once to go forward a step hold for 2 seconds to cycle through at 8 steps per second speed 8 Press DOWN once to go back a step hold for 2 seconds to cycle back at 8 step per second speed 9 If no button is pressed for longer than 8 seconds the device will return to the standard display 10 Alert is on after setting Ⅳ Function...

Page 4: ...s automatically when the temperature is back within normal range GENERAL INFORMATION Synchronizing the units Try changing the channels as the radio signal may be getting blocked by another frequency such as cordless phones and wireless broadband routers Remember to set the outside unit up first On opening the back of the unit you will see a switch By moving the switch you can change the channel on...

Reviews: