- 4 -
Note for Radio Controlled Time:
The time and date display is based on the signal provided by the highly accurate government operated
atomic clock. The base station will continue to scan for the radio controlled time signal each day despite it
being manually set. If reception has been unsuccessful, then the radio controlled time icon will not appear
but reception will still be attempted continually. If reception has been successful, the received time and date
will overwrite the manually set time and date
Please participate in the preservation of the environment by properly disposing of all used batteries at designated
disposal points. Never dispose of batteries in a fire as this may cause an explosion/risk of fire or leakage of
dangerous chemicals and fumes.
3.2 Mounting
1) Base station
With one foldable leg at the back of the unit the base station can be placed onto any flat surface or
wall mounted at the desired location by the hanging holes also at the back of the unit. It is
important to check that outdoor sensor data can be received before permanently mounting any of
the units.
2) Remote sensor
Note:
To achieve a true temperature reading, avoid mounting the remote sensor in direct sunlight.
We recommend that you mount the remote sensor on an outside South-facing wall, obstacles
such as walls, concrete, and large metal objects will reduce the range.
To wall mount use 3 screws to fix the wall bracket to the desired wall and plug the remote sensor
into the bracket.
