13
7.2 Installer Menu
The Installer menu can be selected either by selecting point 6) in the User menu or by holding OK+ESC for about 7 seconds.
To exit the installer menu press ESC or wait for about 60 seconds.
It allows to select the language among English, Italiano, Nederlands, Français, Deutsch, Espanol.
Press OK to enter.
Language is flashing: use
or
to choose.
Press OK to select.
The factory setting (DEFAULT) is English.
It allows to set the date and the time
Press OK to enter.
Use
or
to choose.
Press OK for setting and again to confirm.
Press ESC to go back to the previous menu.
The factory setting (DEFAULT) is NO because the QR200A is not equipped with any
integral physical bypass.
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
6 Heating
7 Heating Threshold
8 Dehumidification
9 Speed Setting
10 Airflow Balancing
11 F7 filter
12 Filter Alarm interval
13 Working Hours Counter
14 Save settings
15 Load settings
16 Restore Default Settings
17 Contrast
18 Debug page
Use
or
to select the menu.
NOTE:
Menu 4 “Bypass settings” displays only if either Menu 3 “Bypass” or Menu 5 “Free Cooling is set on “YES”.
Menu 7 “Heating Threshold” displays only if Menu 6 “Heating” is set on PRE or POST.
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
Installer menu
1 Language
2 Date/Time
3 Bypass
4 Bypass settings
5 Free Cooling
Summary of Contents for QR200A
Page 23: ...23 NOTE ...
