16
The system keeps trace of the actual working hours of the unit. This value cannot be changed. Data is
saved both on the motherboard and on the control panel CTRL-DSP, to be safe in case of fault.
Press OK to enter.
Press OK or ESC to go back to the previous menu.
It allows to save the setting of the #1 (prototype) installation in the internal memory of the CTRL-DSP to be
loaded afterwards in other units.
Press OK to enter.
Use
or
to choose the position where to save hte setting. Up to 8 differrent settings can be saved.
Press OK to select.
Press OK to confirm.
Press ESC to go back to the previous menu.
It allows to load the saved setting on the next unit.
Press OK to enter.
Use
or
to choose the desiderd saved setting.
Press OK to select.
Press OK to confirm.
Press ESC to go back to the previous menu.
Installer menu
16 Restore Default Settings
17 Contrast
18 Debug page
It allows to restore all the factory settings (
DEFAULT
).
Press OK to enter.
Press OK to confirm.
Installer menu
16 Restore Default Settings
17 Contrast
18 Debug page
It allows to set the LCD contrast.
Press OK to enter.
Use
or
to increase or decrease the contrast.
Press OK to confirm.
Installer menu
16 Restore Default Settings
17 Contrast
18 Debug page
It shows the internal functional parameters of the unit.
Press OK to enter.
Press ESC to go back to the previous menu.
Installer menu
11 F7 filter
12 Filter Alarm interval
13 Working Hours Counter
14 Save settings
15 Load settings
Installer menu
11 F7 filter
12 Filter Alarm interval
13 Working Hours Counter
14 Save settings
15 Load settings
Installer menu
11 F7 filter
12 Filter Alarm interval
13 Working Hours Counter
14 Save settings
15 Load settings
Summary of Contents for QR200A
Page 23: ...23 NOTE ...
