AEQ XPEAK User Manual Download Page 12 | Manualshive

Page: 12 / 103

AEQ XPEAK User Manual Download Page 12

AEQ

XPEAK

IP Intercom System

12

1.5. Xpeak_IF I/O Interface Description.

Ergonomics:

•

4 Channel audio I/O converter for analog, USB and AoIP Dante / AES67 to 4
bidirectional G722 encoded channels that integrates with the virtual matrix or the Party-
Line system.

•

USB connection: The 4 USB audio ports are type B and allow you to connect audio
from a PC.

•

Ethernet connection: Internal switch with two external network ports. Different uses:
daisy chain, separation between Dante audio and encoded audio + Control.

•

GPIOs: Mini-Hartmann connectors include 4 opto-coupled GPIs and 4 GPOs, external
power pin and ground.

•

1.54" color TFT screen: Allows information such as IP address, audio presence and
status to be displayed.

•

Encoder and menu key to navigate the user interface and facilitate configuration and
status viewing.

Dimensions and weight:

•

Front: Width: 482.6 mm. Height: 44.5 mm.

•

Depth: 155 mm.

•

Weight: 2.42 Kg.

1.6. Xpeak Virtual application description.

•

Virtual user panel.

•

PC software.

•

Windows operating system.

•

16 virtual crossover keys.

•

Compatible with Xpeak in all work
modes.

•

Adaptive

screen

configuration:

vertical, horizontal or square.

«
...
10
11
12
13
14
...
»

Summary of Contents for XPEAK








































































































Reviews:

No comments