09
08
Setting Mode
Temperature
1
2
3
4
5
6
7
8
9
+/-
0
.
CLR
DEL
Enter
15.0
～
38.0
25.0
25.0
OFF
OFF
OFF
OFF
OFF
30.0
50
1500
3
Auto
中
0
0
1
9
8
+
-
Humidity
1
2
3
4
5
6
7
8
9
+/-
0
.
CLR
DEL
Enter
25.0
～
50.0
30.0
25.0
OFF
OFF
OFF
OFF
OFF
30.0
50
1500
3
Auto
中
0
0
1
9
8
+
-
1. Temperature Setting
a) Enter “Setting Mode”.
b) Click the existing temperature figure in “Tempera-
ture” bar.
c) Set the desired temperature by clicking the numbers in the
newly opened settings box, within the range of 15 -38 Celsius
Degrees (59 -100.5 Fahrenheit).
d) Click “Enter” to set and save the new value, and then click
the “X” in the top right corner of the settings box to close the
settings box.
2. Humidity Setting
a) Enter “Setting Mode”.
b) Click the existing humidity figure in “Humidity” bar.
c) Set the desired humidity by clicking the numbers in the
newly opened settings box, within the range of 25 -50%, click
the “X” in the top right corner of the settings box to close the
settings box.
Temperature
Humidity
3. Oxygen Density Setting
a) Enter “Setting Mode”.
b) Click the existing oxygen figure in “O
2
Density” bar.
c) Input the desired oxygen density value by clicking the newly
opened setting box, within the range of 21 -65%.
d) Click “Enter” to set the new oxygen level, click the “X” in the
top right corner of the Settings box to close the settings box.
4. Carbon Dioxide Density Set
a) Enter “Setting Mode”.
b) Click the existing carbon dioxide figure in “CO
2
Density” bar.
c) Input the desired carbon dioxide density by clicking the
newly displayed setting box, within the range of 200
-2000ppm.
d) Click “Enter” to set the new carbon dioxide level, click the
“X” in the top right corner of the settings box to close the
settings box.
5. Illumination Light Set
a) Enter “Setting Mode”.
b) Click the existing time figure in “Light Timer” bar.
c) Input the desired working time for illumination light by
clicking the newly displayed setting box, within the range of 1
-360 minutes.
d) Click “Enter” to set the illumination light working time, click
the “X” in the top right corner of the settings box to close the
settings box.
6. Light Brightness Set
On “Setting Mode” interface, the light brightness can be
adjusted by pressing either “+” or “-“ button on “Light
Brightness” bar, displayed in the graph here.
Once the level of brightness is set, illumination light will start.
7. Ventilation Fan Control
a) Enter “Setting Mode”.
b) Click the existing fan speed on “Fan Speed” bar, to shift
fan speed through “high”, “middle” and “low”.
O
2
Density
1
2
3
4
5
6
7
8
9
+/-
0
.
CLR
DEL
Enter
21
～
65
50
25.0
30.0
50
1500
3
Auto
中
+
-
CO2 Density
1
2
3
4
5
6
7
8
9
+/-
0
.
CLR
DEL
Enter
200
～
2000
1500
25.0
30.0
50
1500
3
Auto
中
+
-
Light Timer
1
2
3
4
5
6
7
8
9
+/-
0
.
CLR
DEL
Enter
0
～
360
3
+
-
25.0
30.0
50
1500
3
Auto
中
+
-
25.0
30.0
50
1500
3
Auto
中
+
-
O
2
Density
CO
2
Density
Light Brightness
Fan Speed
Light Timer
Remarks: Fan running speed will affect heating or cooling efficiency, please make decisions
according to actual needs based on animal patients status and ambient temperature.
MIDDLE
