11
ENGLISH
Congratulations for having chosen the quality and reliability of EOLO
professional products. The VAPOR ONE series is made with the latest
generation of professional steam generators, characterized by the presence
of the revolutionary energy-saving copper boiler with external anti-limescale
to ensure high performance and reliability over time. These generators allow
you to intervene effectively in the removal and elimination of all types of
dirt and pathogens: grease, limestone, bacteria, dust mites, germs, fungi,
viruses, etc. A wide range of accessories is available to meet all specific
cleaning and sanitizing needs.
BEFORE USING THE MACHINE
READ THE INSTRUCTIONS BOOK CAREFULLY
GENERAL WARNINGS
After removing the packaging, make sure the device is intact. If in doubt, do not
use the appliance and contact the nearest service center. Bags made of plastic,
polystyrene, etc. they must not be left within the reach of children as they are a
potential source of danger. Before connecting the appliance, make sure that the data
on the plate correspond to the power supply. Connect the appliance to an effective
grounding system as required by current safety regulations. Do not touch the appliance
with damp or wet hands. Do not leave the appliance unattended and unnecessarily
powered as it can become a source of danger. This appliance is intended solely and
exclusively for the use for which it was designed and the manufacturer cannot be held
responsible for any damage due to improper use. During use, the safety cap must
not be removed. Before carrying out any cleaning or maintenance operations, make
sure you have disconnected the equipment from the mains by removing the power
plug. Do not wash the equipment with jets of water, and do not immerse in water.
Before filling the boiler, disconnect the plug from the socket. In case of breakdown
or malfunction, turn off the appliance, unplug it and call the service center. Any
repairs must be carried out exclusively by an assistance center authorized by the
manufacturer. Always require the use of original spare parts. Installation must be
carried out according to the manufacturer’s instructions (spaces for ventilation,
ambient temperature, etc.). It is important to have the power cord replaced as soon
as it is damaged, even minor. Once the work has been completed, turn off the boiler
switches and remove the plug from the socket. It is not necessary to empty the boiler
of residual water. Do not remove the safety devices and protections. At the end of
use, turn off all switches. In case of long periods of inactivity, unplug the power plug,
empty the boiler and store the machine in a dry place.
FAILURE TO COMPLY WITH THE ABOVE INDICATED MAY COMPROMISE
SAFETY.
DO NOT REMOVE THE SAFETY DEVICES AND PROTECTIONS. DO NOT PERFORM
MAINTENANCE AND REPAIR WORK BEFORE THE POWER IS DISCONNECTED AND
THE BOILER IS COLD AND PRESSURE-FREE.
IMPORTANT
The materials used for packaging are recyclable, so they are selected according
to the criteria of respect for the environment. Keep the original packaging and the
polystyrene parts in order to be able to transport the device even at a later time.
Keep
