Digital Transformer Ratiometer DTR
®
Model 8510
19
3.
The display will now show the following screen:
Figure 4-11
4.
Select
List
by pressing the ▼ key. The list can then be scrolled from
0 to 9 Nameplate values by using the ▼ or ▲ key. Select the desired
Nameplate by pressing
ENTER
. The display will return to
Setup
Nameplate
.
Figure 4-12
5.
Press
ENTER
, then Yes (▼) on Enable.
6.
Select
Edit
by pressing the ▼ key. The values in the Present Name
-
plate can be edited digit by digit by selecting each digit with the ▼ or
▲ and then pressing the
ENTER
key. When the last digit on the Sec
-
ondary is selected, the display returns to
Setup Nameplate
.
Figure 4-13
NOTE:
• Selecting one transformer from the list will replace the values
in the Present Nameplate immediately. The values can then be
changed in the
Edit
mode if needed.
• Selecting
Edit
will allow the user to modify the values in the
Present Nameplate.
• The
Edit
process changes the values in the Present Nameplate
only. The values previously stored would remain the same. The
stored
List
values can only be changed in DataView
®
.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412