14
Digital Transformer Ratiometer DTR
®
Model 8510
•
Main Screen:
Displays the Test Type, Test Mode, Filter [Fast (F),
Normal (N) or Slow (S)], Storage Mode [Auto (A) or Manual (M)] and
the Present Nameplate values (if enabled).
• Configure Instrument:
Configures the instrument (see § 4.3).
•
Recall Data:
Stored data can be selected and displayed (see § 4.4).
NOTE:
The program flow is two or three levels deep at various points.
The available choices for a level can be viewed by pressing the
▼
or
▲
keys.
The
ENTER
key is used to select the following functions:
• Enter configuration menu.
• Enter Recall Data menu.
• Initiate storage of test results, accept location parameters and store
the Measurement Record.
4.3 Configure Instrument
With the display showing
Configure Instrument
, press the
ENTER
key.
The configuration ring (see Figure 4-4) can be navigated around using the
▲ or ▼ key.
Figure 4-3
•
Set Clock:
Allows the setting of Time and Date.
•
Setup Nameplate:
Allows selection and editing of Present
Nameplate voltages or ratios. Predefined ratios can only be edited
through DataView
®
.
•
Select Test Type:
Allows the selection of Test Type (VT/PT or CT).
•
Select Test Mode:
Allows selection of the Test Mode (Ratio or
Continuity/ Ratio in VT/PT Mode).
•
Select Storage Mode:
Allows the selection of data storage mode
(Automatic or Manual).
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412
