MODEL 6292
SERVICE/CALIBRATION MANUAL
CAT.# 2129.83
4.
Firmware Update
Requirements
•
Computer with USB2.0 or higher
•
USB drivers installed
•
HyperTerminal (or other terminal emulation program)
Firmware Update Procedure
1. Connect the USB cable from computer to the powered off AEMC 6292.
2. Launch HyperTerminal.
3. Configure HyperTerminal Com Port as shown below (same as Control Panel > Device Manager).
◦
57600 bps, 8 bits, No parity, No Flow Control
4. Press and hold the ZERO and TWO keys.
5. Power on the instrument, while pressing the ZERO and TWO keys.
6. The following screen will be displayed.
FIRMWARE UPDATE!
v1 - 03/15
- 8 -
