background image

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

 
 

 

 

This  product  is  legal  in  California  for  racing  vehicles  only  and  should  never  be 
used on public highways.

 

 
 
 
 

WARNING:

 

!

 

This installation is not for the electronic novice or the PC illiterate! 
Use this system with EXTREME caution! If you are not well versed in 
electronics and vehicle instrumentation or are not PC literate, please 
do not attempt the installation. Refer the installation to an AEM 
trained tuning shop. A list of AEM trained tuning shops is available 
at 

www.aemelectronics.com/dealer_locator.php

 or by calling 800-

423-0046. You should also visit the AEM Performance Electronics 
Forum at http://www.aemelectronics.com. 
 
NOTE: AEM holds no responsibility for any engine damage that 
results from the misuse of this product! 

 

 

NOTE:  All  supplied  AEM  calibrations,  Wizards  and  other  tuning 
information  are  offered  as  potential  starting  points  only.  IT  IS  THE 
RESPONSIBILITY  OF  THE  ENGINE  TUNER  TO  ULTIMATELY 
CONFIRM  IF  THE  CALIBRATION  IS  SAFE  FOR  ITS  INTENDED  USE. 
AEM holds no responsibility for any engine damage that results from 
the misuse or mistuning of this product! 

 

AEM Performance Electronics 

2205 126

th

 Street Unit A, Hawthorne, CA. 90250 

Phone: (310) 484-2322 Fax: (310) 484-0152 

http://www.aemelectronics.com 

Instruction Part Number: 10-7100 

 2013 AEM Performance Electronics 

 

INFINITY 

Quick Start Guide 

Summary of Contents for INFINITY ECU





































Reviews: