AEM INFINITY ECU, Quick Start Manual

Page: 32 / 36

RevC 07/15/13 Page 32
INFINITY INSTALLATION REQUIREMENTS
Pre-installation check
Check the following before installation:

Fuel pressure (must be set to factory specs)

Spark plugs (recommend starting with new plugs)

Ignition timing (must be set to factory specs)

Fuel filter (recommend starting with new filter)

Fuel injectors (must be in known good working condition)

Spark plug wires

Distributor cap and rotor (if applicable)

See included fuel system recommendations before starting

Clean bare-metal ground connections for universal applications

13.8V (10V absolute minimum) main relay power distribution for universal
applications
Universal Wiring Options

30-3702 - Harness, Infinity-10 Mini Lead (sold separately)

30-3701 - Connector Kit, Infinity-10 (sold separately)
Plug and Play Wiring Options

30-3500 - Harness Kit, Infinity Supra (sold separately)
Accessories

30-3600 - O2 Sensor Ext Harness, Infinity

30-3601 - IP67 Comms Cable, Infinity

30-3602 - IP67 Logging Cable, Infinity

Molex Crimp Tools (can be purchased from http://www.newark.com )
o
Molex Part No: 63811-4200 (recommended crimp tool)
http://www.newark.com/molex/63811-4200/hand-crimp-
tool/dp/81H6890?Ntt=63811-4200
o
Molex Part No: 63811-1000 (less expensive alternative to 4200)
http://www.newark.com/molex/63811-1000/hand-crimp-
tool/dp/85C2464?Ntt=63811-1000