RevC 07/15/13
Page 17
5) Connect to InfinityTuner
a. Plug the USB cable from the ECU into your
PC’s USB port
b. Open InfinityTuner, If the wiring harness is installed correctly and ignition
power is on, InfinityTuner should connect automatically. If not, then click
the Connection drop-
down list and select “Connect to USB”
6) Click the Target drop-
down list and select “Upgrade firmware…”
7)
The ECU should not be running an engine at this time. Select “Yes” when the
warning message appears.
8) Begin the Firmware Upgrade process. Note: The firmware upgrade utility is
periodically updated and may not match the descriptions below. In the event of a
conflict, please follow the instructions included in the dialog windows themselves
or any supplemental documentation provided by AEM.
a.
Select the desired Configuration “Image” on the left
b.
Click the “Begin” button to start the upgrade process
Summary of Contents for INFINITY ECU
Page 35: ...RevC 07 15 13 Page 35...
