3
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
2. Removal of stock system
Read and understand these instructions BEFORE attempting to install this product. Failure to
follow installation instructions and not using the provided hardware may damage the intake
tube, throttle body and engine.
The AEM
®
intake system is a performance product that can be used safely during mild weather
conditions. During harsh and inclement weather conditions, you must return your vehicle to
stock OEM air box and intake tract configuration. Failure to follow these instructions will void
your warranty.
b. Remove the front inlet duct located near the battery.
a. Stock airbox system installed.
c. Remove the PCV line from the inlet tube by com-
pressing the spring clip with a pair of pliers, while
twisting the tube out of the housing.
d. Repeat the same process of step 2c, but on the
crankcase side.
