AEM Performance Electronics CD-5 Carbon, User Manual, Page: 96 / 120

96
The On Time, Off Time and Min On Time can be used to affect how the warning is displayed when only one warning
is active and are scaled in milliseconds. For example, to have a single message flash at 2Hz, set the On Time to
1000 and the Off Time to 1000. Setting the Off Time to 0 disables flashing.
The Min On Time can be used to ensure a warning is visible even if it is only briefly triggered. For example, a low oil
pressure alarm triggered during cornering may only occur for a fraction of a second but by setting the Min On Time
to 2000 ensures that the message is displayed for 2 seconds and so is more likely to be seen.
Odometer and Turn Blinkers
AEM Dash has a built in odometer function. This is an internal counter backed up to non-volatile memory that cannot
be reset (it is set to zero when the unit is built).
To set up the odometer, choose Setup | Odometer . Select an output that is road speed km per second. AEM
DashDesign will automatically create an output called ODOMETER which is scaled in km and can be displayed on
the screen.
All AEM base setups include an odometer scaled in both miles and kilometers.
An optional turn blinkers feature is available on some AEM supplied setups. Pins 11 and 12 can be used for LEFT
TURN and RIGHT TURN blinkers respectively. When these inputs are grounded, the turn blinkers will activate.