15
14
Parameter adjustment
Enter the setting mode by pressing the “Set” button 5s, and parameters are as follows:
ALH
Ts
Description
Minimum Value
Alarm Limit High
2
5
Temperature Set
Parameter
Maximum Value
8
10
Step/Unit
0.1/
℃
0.1/
℃
Default
value
5
8
t1
ALL
The initial delay of
the voltage unit
1
0
Alarm Limit Low
4
10
0.1/
℃
1/min
2
0
dAt
Fd
Delayed Alarm Time
10
1
Restart intervals after
beeping cancellation
99
12
1/min
1/min
30
2
LC
0
(Light not controlled
by the computer panel)
Light Control
1
(Light controlled by
the computer panel)
Null
0
The above parameters are subject to the user’s modifications, after entering the parameter table,
when “Ts” is displayed , press “Plus” or “Minus” for your own parameter; and then press “Set” to
enter the parameter to be set, when current value is flashing, then press “Plus” or “Minus” to adjust
parameter value. After setting , press “Set” to go back and choose other parameters for the same
token. With all values set, press “Set” button 5s exit and return to the normal display mode.
Temperature Display
Application method
The refrigerator can automatically reach the temperature set before ex-factory.
Temperature Display
2
1
3
4
5
Operation
Operating key
Normal model
Implications
Plug and power on
Switching key
Switching
Swtiching
Repeat the operation
from the second key
Temperature on Average
upper Tem.
lower Tem.
Tem. of the upper Tem. Box
Temperature
on Average
Temperature of the
upper temperature
measuring box
Light on
Light off
upper Tem.
lower Tem.
upper Tem.
lower Tem.
upper Tem.
lower Tem.
Tem. of the lower Tem. Box
Temperature on Average
Temperature of the
lower temperature
measuring box
Temperature
on Average
The temperature shown indicates both the upper and lower temperature of the refrigerator measured
respectively. And the temperature of the sensors indicates the temperature of the refrigerator on
average.
