manualshive.com logo in svg

AEG Thyro-E 3A-10, Operating Instructions Manual

Share
Download
AEG Thyro-E 3A-10 Operating Instructions Manual Download Page 19

Installation 

 

Operations Manual Thyro Power Manager 

 

 

Page 20 of 20 

Version: 1.7.2009 

8000022632 BAL, EN 

 

 
 

 

The control has to be carried out by a device provided by the user for systems without 
integrated timer. Contacts can be used for this purpose as shown in  

Figure  7  or  voltage 

outputs, as shown in  Figure 8. See also chapter 9.3 Setting of the Timer. 

 

   

 

 

  Figure 7: Connection Diagram of the Thyro-E without timer (control by external contacts) 

 

 

   

 

 

  Figure 8: Connection Diagram of the Thyro- E without timer (control by external outputs) 

 

Three-phase systems can be interconnected from three individual Thyro-E systems. In this 
case, only one of the three systems has to be equipped with a timer. Such a three-phase 
system would consequently consist of one Thyro-E System 3A-xxx E 

T

 and two Thyro-E 

System 3A-xxx E. Besides the respective other phase connection (L1, L2, L3), control 
signals have to be interconnected in addition so that one timer can be used by all systems. 

See also the following connection diagram for this purpose: 
 

Summary of Contents for Thyro-E 3A-10




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands