AEG Protect D 10000 LCD User Manual Download Page 19

Page: 19 / 82

Check the provided accessories!

Verify that the following additional items are included with the unit:

Protect D LCD

6000/10000

Protect D

6000/10000BP LCD

Battery power cable

USB cable

RS232 cable

Parallel cable

Dry contractor

EPO contractor

Stabilizer bracket

Extension plate of

stabilizer bracket

Ear bracket

User manual

Rail kit

S: standard configuration
A: assembled to unit

O: optional configuration

If you ordered other accessories, please contact with local sale center.

Notes

The cabinet is heavy, please see spec weight provided on the carton/label.

Do not lift the unit’s front panel and rear panel.

Discard or recycle the packaging in a responsible manner or store it for

future use.

Packing materials must be disposed in compliance with all local regulations
concerning waste. Recycling symbols are printed on the packing materials

to facilitate sorting

Summary of Contents for Protect D 10000 LCD



















































































Search results

Summary of Contents for Protect D 10000 LCD

Reviews:

Related manuals for Protect D 10000 LCD

Brands by name

Popular brands

AEG Protect D 10000 LCD, User Manual

Search results

Summary of Contents for Protect D 10000 LCD

Reviews:

Related manuals for Protect D 10000 LCD

Brands by name

Popular brands