Setting dryness level
If laundry comes out of the machine too
damp after a standard drying programme,
you can increase the drying result by using
the DRYNESS function. Laundry becomes
drier as you move from
MIN
to
MAX
.
Press the DRYNESS button repeatedly until
the desired dryness level (
MIN
,
MED
or
MAX
) is shown in the display. When humidity
adjustment is not foreseen on the related
program, bar frame with
AUTO
text is shown.
If wool or silk comes out of the machine too damp at the end of a WOOL or SILK
programme, you can dry it again by restarting the appropriate programme, this
time with the DRYNESS function selected and dryness level
MIN
,
MED
or
MAX
. In
the case of a drying cycle with relatively dry laundry, the length of the programme
cycle displayed at the beginning is corrected after a while.
Setting the pre
-
drainage spin speed
If the washing in the washing machine was
initially drained prior to the drying cycle, the
dryer can be set according to the spin speed
of the initial drainage procedure. The higher
the spin speed was, the shorter the pro
-
gramme length for the drying cycle.
Press the SPIN SPEED button a number of
times until the desired spin speed of the initial
drainage is displayed. No value is shown if no spin speed is selected.
In certain programmes the spin speed has not
effect (time controlled cycles), its selection
can be not selectable and only three dashes
are visualized. Available selections:
16
Daily use
