Setting long anti
-
crease function
Press the LONG ANTI-CREASE button. A 90
minute anti-crease phase is set. The display
now shows the LONG ANTI-CREASE icon
. If this additional function is selected, the
anti-crease phase at the end of the drying
cycle is lengthened by 60 minutes. The laun
-
dry can be removed at any time during the
anti-crease phase.
Buzzer
The appliance is supplied with the BUZZER
function deactivated.
To activate buzzer press BUZZER button.
The button is used to switch the function on
or off. When the function is active, the BUZ
-
ZER symbol appears in the display.
The buzzer sounds or plays a tune during:
– cycle end
– anti-crease phase and when phase starts or ends
– cycle interruption by a warning
– alarm
Time
To select the programme duration after set
-
ting the TIME programme. You can select a
programme duration from 10 mins to 3 hrs in
10-minute steps.
1. Turn the programme knob to the TIME
programme. The blinking 10' above TIME
button is on.
2. Press the TIME button repeatedly until the
desired programme duration is shown in the display, e.g. 20 for a programme
of 20 minutes.
Daily use
17
