background image

Environment

The symbol     on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it should be taken to the appropriate
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local
council, your household waste disposal service or the shop where you purchased
the product.

Packaging material

The packaging materials are environmentally friendly and can be recycled. The
plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose
of the packaging materials in the appropriate container at the community waste
disposal facilities.

Old appliance

The heat pump of your dryer contains a closed refrigerant circuit filled with a
refrigerant which is free from fluoro-chloro-hydrocarbons. The refrigerant circuit
in the heat pump must not be damaged.

WARNING!

Remove mains plug from socket when you have no further use for the machine.
Cut off mains cable and dispose of together with plug. Destroy loading door hook.
Children cannot then lock themselves in the machine and put their lives at risk.

40

Environment

Summary of Contents for LAVATHERM 59840

















































Reviews: