The DRYING TIME DURATION symbol appears for a few seconds on the display near
the duration value. Press then button
7
to start the programme. A black dash flash-
es under the DRYING symbol.
Note!
The programme time will automatically increase by a few minutes.
Important!!
If you set only 10 minutes of drying phase with the drying time button (5), the ap-
pliance performs only a cooling phase.
5.
Press button
7
to start the programme.
After the programme has started, the time remaining is updated every minute.
6.
At the end of the drying programme, the buzzer sounds. A blinking «
0
» appears on the
display. At this point, begins an anti
-
crease phase which lasts for about 10 minutes.
During this time the ANTI
-
CREASE symbol appears on the display. The DOOR symbol
remains lit. The door cannot be opened.
If you need to open the door before or during the anti
-
crease phase or to interrupt it, press
any button or turn the programme selector dial to any programme position (except
.
The door can be opened immediately or after a few minutes depending on the model. (In
any case do not try to open the door if it is locked!) .
7.
Turn the selector dial to the position to switch the machine off.
8.
Remove the laundry.
Note!
The different type of cottons (towelling, sheets, shirts, and so on) or any laundry items roll-
ing up during the spinning phase may result in partial dryness.
In the exceptional case that at the end of the cycle the laundry remains slightly wet, we
suggest that you unfold the rolled up items, redistribute them evenly in the drum and se-
lect an additional drying cycle of 20
-
30 minutes.
USE - WASHING AND DRYING
NON-STOP programme: Washing and Automatic drying
The recommended load size is 4 kg for cotton and 2 kg for synthetic.
CAUTION!
Do not use a dosing device/ball when carrying out a washing and drying programme.
1.
Load the laundry.
2.
Add detergent and fabric softener.
3.
Switch the machine: turn the selector dial to the washing programme/fabric required.
4.
Press the relevant buttons to select the required options.
If possible, do not select a spin speed lower than that proposed by the appliance to avoid
too long a drying time therefore saving energy.
In any case the lowest values you can select is 900 r.p.m. for cottons and synthetic. The
reduction of the spin speed is only possible after selecting drying.
18
Use
-
Washing and Drying
