After selecting a drying programme, the drying time is displayed in minutes and/or hours
(max 250 mins).
After the programme has started , the time remaining id updated every minutes.
• Incorrect option selection
If an option, which is not compatible with the set wash programme is selected, the mes-
sage
Err
is displayed for a few seconds and the yellow light of button
7
starts blinking.
• Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see chapter «What to do if...»).
• End of the programme
When the programme has finished a blinking zero is displayed, the DOOR symbol dis-
appears and the door can be opened.
9.8
-
DRYING TIME duration
-
symbol
9.9
-
DELAY START
-
symbol
FIRST USE
• Ensure that the electrical and water connections comply with the installation instruc-
tions.
• Remove the polystyrene block and any material from the drum.
• Before the first wash, run a cotton cycle at the highest temperature without any laundry
in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a
measure of detergent into the main wash compartment and start the machine.
PERSONALIZATION
Acoustic signals
The machine is provided with an acoustic device, which sounds in the following cases:
• at the end of the cycle
• in the event of operating problems.
By pressing the
3
and
4
buttons simultaneously for about 6 seconds, the acoustic signal is
deactivated (except for the events of operating problems). By pressing these two buttons
again, the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended and not to worry that children
might be injured by or cause damage to the appliance.
This function remains able also when the washing machine is not working.
There are two different ways to set this option:
• Before pressing button
7
: it will be impossible to start the machine.
• after pressing button
7
: it will be impossible to change any other programme or option.
To enable or disable this option press simultaneously for about 6 seconds buttons
4
and
5
until the symbol
9.6
appears or disappears on or from the display.
First use
11
