Cancelling the delayed start
• Set the washing machine to PAUSE by pressing the button
7
;
• Press button
8
until the symbol ’ is displayed;
• Press the button
7
again to start the programme.
The selected delay can be changed only after selecting the washing programme again.
The Delay Start can not be selected with the draining programme.
Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before you make
any change, you must press the button
7
to pause the appliance.
Changing a running programme is possible
only by resetting it
.
Turn the programme dial to
and then to the new programme position.
Press the
7
button again to start the new programme. The washing water in the tub will
not emptied out.
Interrupting a programme
Press the button
7
to interrupt a programme which is running, the corresponding light
starts blinking. Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to to cancel a programme which is running. Now you can select a
new programme.
Opening the door after the programme has started
When the machine is working and through the delay time, the door is locked. If, for any
reason, it is necessary to open it, set firstly the machine to pause by pressing the button
7
.
• If the DOOR symbol disappears from the display, the door can be opened.
• If the DOOR symbol stays on, and the door remains locked, this means that the machine
is already heating or that the water level is too high. In this case the door can not be
opened.
If you cannot open the door but you need to open it you have to switch the machine off by
turning the selector dial to . After a few minutes the door can be opened
(pay attention
to the water level and temperature !)
.
After closing the door, it is necessary to select the programme and options again and to
press button
7
.
At the end of the programme
The machine stops automatically. The pilot light of button
7
goes off and a blinking ap-
pears on the display. The acoustic signal sounds for a few minutes.
If you have chosen a programme or an option that ends with water left in the tub.
Before you empty out the water, the drum continues to run at regular intervals until the
water draining.
Follow the below instruction to empty the water out:
• turn the programme selector dial to
16
Daily use
