AEG L6FEG142P User Manual Download

Page: 23 / 40

Make sure that the flap does not cause a

blockage when you close the drawer.

12.5 Setting a programme

1. Turn the programme dial to select the

desired washing programme. The

related programme indicator comes

on.

The indicator of the Inicio/Pausa button

flashes.

The display shows the maximum

declared load for the programme, the

default temperature, the default spin

speed, the washing phase indicators

(when available) and an indicative

programme duration.

2. To change the temperature and/or

the spin speed, touch the related

buttons.

3. If desired, set one or more options by

touching the related buttons. The

related indicators come on in the

display and the given information

changes accordingly.

In case a selection is not

possible, no indicator

comes on and an acoustic

signal sounds.

12.6 Starting a programme

with the delay start

1. Touch this repeatedly until the

display shows the desired delay time.
The indicator comes on.

2. Touch the Inicio/Pausa button.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts.

The ProSense estimation

starts at the end of the

countdown.

Cancelling the delay start

after the countdown has

started

To cancel the delay start:

1. Touch the Inicio/Pausa button to

pause the appliance. The related

indicator flashes.

2. Touch the Inicio Diferido button

repeatedly until the display shows .

3. Touch the Inicio/Pausa button again

to start the programme immediately.

Changing the delay start after

the countdown has started

To change the delay start:

1. Touch the Inicio/Pausa button to

pause the appliance. The related

indicator flashes.

2. Touch the Inicio Diferido button

repeatedly until the display shows the

desired delay time.

3. Touch the Inicio/Pausa button again

to start the new countdown.

12.7 Starting a programme

Touch the Inicio/Pausa button to start the

programme.

The related indicator stops flashing and

stays on.

The programme starts, the door is

locked. The display shows the indicator

The drain pump can operate

shortly before the appliance

fills water.

12.8 The ProSense load

detection

The programme duration in

the display is referred to a

medium/high load.

After touching the Inicio/Pausa button,

the maximum declared load indicator
goes off, the indicator

flashes, the

ENGLISH

Summary of Contents for L6FEG142P









































Search results

Summary of Contents for L6FEG142P

Reviews:

Related manuals for L6FEG142P

Brands by name

Popular brands

AEG L6FEG142P, User Manual

Search results

Summary of Contents for L6FEG142P

Reviews:

Related manuals for L6FEG142P

Brands by name

Popular brands