background image

8

EN

tion.  To choose the required taste, press the 

 icon (B4) 

(fig. 10) a number of times. The required coffee taste is dis-
played.  

2.  Place 1 cup under the spouts to make 1 coffee or 2 cups for 

2 coffees (fig. 13). Lower the spouts as near as possible to 
the cup for a creamier coffee (fig. 12).  

3.  Press the 

 (B5) icon (B5) (fig. 11)  to select the type of 

coffee: espresso, small cup, medium cup, large cup, mug. 
Now press the   (icon (B10) if you want to make a cof-
fee and the    icon (B11) (fig. 13) if you want to make 
2 coffees. The appliance now grinds the beans and starts 
delivering the coffee into the cup.

 

Once the set amount of coffee has been delivered, the ma-
chine stops delivery automatically and expels the exhaust-
ed waste coffee into the waste coffee container. 

4.  After a few seconds, the appliance is ready for use again.
5.  To turn the appliance off, press the ON/OFF/stand-by but-

ton (A7) (fig. 7).  (Before going off, the appliance performs 
an automatic rinse cycle. Take care to avoid scalds). 

NOTE 1: If the coffee is delivered a drop at a time or not at all, see 
the “Adjusting the coffee mill” section.
NOTE 2: If the coffee is delivered too fast and the cream is not 
satisfactory, see the “Adjusting the coffee mill” section.
NOTE 3: Tips for a hotter coffee:
•  Proceed as described in the section “Changing and setting 

menu parameters”, “Rinse” function.  

•  Unless preheated, do not use excessively thick cups as they 

will absorb too much heat.

•  Preheat the cups by rinsing them with hot water. 
NOTE 4:  Coffee delivery can be interrupted at any moment by 
re-pressing the previously selected icon which remains lit during 
the operation. 
NOTE 5: As soon as delivery is finished, to increase the quantity of 
coffee in the cup, just keep pressing the previously selected icon 
within 3 seconds after delivery has finished. 
NOTE 6: When the appliance displays “FILL TANK”, fill the tank 
with water or the appliance will not deliver coffee. 
(It is normal for there to be a little water left in the tank).
NOTE 7: After about 14 single (or 7 double) coffees, the appliance 
displays “EMPTY WASTE COFFEE CONTAINER”.
Even if not full, the empty waste coffee container message is dis-
played 72 hours after the first coffee has been delivered. For the 
72 hours to be calculated correctly, the machine must never be 
turned off with the main switch in the 0 position. 
To clean, open the service door on the front of the appliance 
by pulling the spout (fig. 26), extract the drip tray (fig. 27) and 
clean. 
When cleaning, always extract the drip tray completely. 

 

Important!  

When extracting the drip tray, the waste 

coffee container MUST always be emptied. 
If this is not done, the machine may be clogged. 

NOTE 8: Never extract the water tank while the machine is de-
livering coffee. 
If it is removed, it will not be possible to make the coffee and 
the appliance will display “GROUND TOO FINE ADJUST MILL AND 
PRESS OK” and then “FILL TANK”.  Check the level of water in the 
tank and replace in the appliance.
To turn the appliance back on, insert the water spout if not al-
ready in place (fig. 5), then press the OK icon (B9). “HOT WATER 
PRESS OK” is displayed. 
Press the OK icon (B9) within a few seconds and deliver water 
from the spout for about 30 seconds.  When delivery stops, the 
basic modes are displayed again. 

 N.B.:

 The coffee maker may request the operation to be 

repeated a number of times until the air is completely elminated 
from the hydraulic circuit.

 N.B.:

 if this operation is not performed correctly or if 

the machine is turned off, the basic modes may be displayed, 
although the problem is in fact still present. 

CHANGING THE QUANTITY OF COF-

FEE IN THE CUP

The appliance is set by default to automatically make the follow-
ing types of coffee:
•  espresso
•  small cup
•  medium cup
•  large cup

Summary of Contents for KKE884500

























Reviews: