AEG KKE884500, User Manual

Page: 20 / 24

20
EN
PROBLEM POSSIBLE CAUSE REMEDY
The milk does not come out of the milk
spout (C5).
The intake tube is not inserted or is in-
serted incorrectly.
Insert the intake tube (C4) in the rubber
washer in the milk container lid (fig. 24).
The milk is not well frothed. The milk container lid is dirty.
The frothed milk regulator is not positio-
ned correctly.
Clean the milk container lid as described
in the section “Cleaning the milk contain-
er”.
Adjust following the instructions in the
section “Making cappuccino”.
The milk contains bubbles or squirts out
of the milk spout.
The milk is not cold enough or is not
semi-skimmed.
The frothed milk regulator is incorrectly
adjusted.
The milk container lid is dirty.
You should ideally use skimmed or
semi-skimmed milk at refrigerator tem-
perature (about 5°C). If the result is still
disappointing, try another brand of milk.
Move the frothed milk regulator slightly
towards the word “CAFFELATTE” (see sec-
tion “Making cappuccino”).
Clean the milk container lid as described
in the section “Cleaning the milk contain-
er”.