background image

16

EN

 N.B.: 

 Use the descaler recommended by the manufac-

turer only.  
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the 
guarantee. 

When “PLEASE DESCALE !” is displayed, the machine requires 
descaling.  
Proceed as follows:
•  make sure the machine is ready;
•  Press the 

 icon (B2) to enter the menu and then the

 icons (B7) and (B8) until “DESCALE” is displayed.

•  Press the OK icon (B9). 
 

The message “ADD DESCALER PLEASE CONFIRM” is dis-
played.

•  Empty the tank of water, pour the contents of the descaler 

bottle into the tank respecting the instructions given on the 
descaler pack, then add water.. 

 

Position a container with a capacity of 2 litres under the hot 
water spout. 

•  Press the OK icon (B9). Descaler flows out of the hot water 

spout into the container below.

 

The appliance displays: “DESCALING”. 

•  The descale programme automatically performs a series of 

deliveries and pauses.

•  After about 30 minutes “DESCALE COMPLETE PLEASE CON-

FIRM” is displayed. 

•  Press the OK icon (B9). “RINSING FILL TANK” is displayed. 
•  Empty the water tank, rinse to eliminate descaler residues, 

then fill with clean water. 

•  Replace the tank full of clean water.
 

“RINSING PLEASE CONFIRM” is displayed again. 

•  Press the OK icon (B9) again. 
 

Hot water flows out of the spout into the container below 
and “RINSING” is displayed.

•  Wait  until “RINSING  COMPLETE  PLEASE  CONFIRM”  is  dis-

played. 

•  Press the OK icon (B9). 
 

“DESCALE COMPLETE” is displayed, then “FILL TANK!”. 

 

Fill the tank again with clean water.

•  The descale programme is now terminated and the appli-

ance is ready to make coffee again.

 

NOTE: If descaling is interrupted before completion, the 
process must be begun again from the beginning. 

 

Important!

 

FAILURE TO DESCALE THE APPLIANCE REG-

ULARLY INVALIDATES THE GUARANTEE.

Resetting default values (reset)

If you change the original values, the default values can be reset 
as follows:
•  Press the 

  icon (B2) to enter the menu and then the

 icons (B7) and (B8) until “RESET TO DEFAULT” is dis-

played.

•  Press the OK icon (B9) and the appliance displays “RESET TO 

DEFAULT PLEASE CONFIRM”.

•  press the OK button (B9) to reset the default values;

Statistics

This displays statistics relating to the machine.  
To display, proceed as follows:
•  Press the 

 icon (B2) to enter the menu and then the 

 icons (B7) and (B8) until “STATISTICS” is displayed.• 

Press the OK icon (B9).

•  Press the 

 icons (B7) and (B8) to verify:

•  How many coffees and cappuccinos have been made.
•  How many times the machine has been descaled.
•  How many cappuccinos have been made;
•  The total number of litres of water delivered.
•  Press the ESC icon (B6) once to exit the function or twice to 

exit the menu.  

Buzzer

This activates or deactivates the buzzer emitted by the machine 
each time an icon is pressed or an accessory is inserted/removed.

 N.B.: 

 The buzzer is active by default.

• 

Press the

 icon (B2) to enter the menu and then the 

 icons (B7) and (B8) until “BUZZER” is displayed. 

•  Press the OK icon (B9). “BUZZER PLEASE CONFIRM” is dis-

played. 

•  Press the ESC (B6) icon (B6) to disable or the OK icon (B9) to 

enable the buzzer.

•  Press the  ESC (B6) icon (B6) to exit the menu.

Adjusting contrast

To increase or reduce the contrast of the display, proceed as fol-
lows:
•  Press the 

 icon (B2) to enter the menu and then the 

 icons (B7) and (B8) until “CONTRAST” is displayed.

•  Press the OK icon (B9).
•  Press the 

 icons (B7) and (B8) until the required dis-

play contrast is reached. The progressive bar indicates the 
level of contrast selected. 

Summary of Contents for KKE884500

























Reviews: