English
48
Audio Setup Page
In menu item
Angle Mark
you activate/deactivate playback of different
camera angles for DVD playback. This menu item is only valid for DVDs,
which contain scenes shot from different camera angles.
In menu item
OSD lang
you set the language for the displayed setup
menus.
In menu item
Screen saver
you activate/deactivate the screen saver.
In menu item
Closed Captions
you activate/deactivate the display of
subtitles for hearing impaired (if available on the DVD).
If in the menu item
Last memory
the setting is “On”, then the unit saves
the last playback position of a DVD/CD/VCD. After turning the unit off
and on again playback continues from the saved position.
Press SETUP (6) on the remote control.
The main menu is displayed and the
General Setup Menu
icon is high-
lighted.
Repeatedly press
(8) until the
Audio Setup Page
is displayed.
Press
(8) to highlight a menu item.
Press
(8) to access the respective submenu.
Press
, (8) and ENTER (7) to select the desired setting.
In menu item
Analog Audio Setup
you adjust the audio output to your
speakers and your listening habits.
PLEASE NOTE
Select under “Dolby Digital Setup” the corresponding audio
►
format if the unit is connected to an external amplifier via optical
or coax cable.
Depending on mode and speaker settings not all speakers may be
►
active.
In radio mode the subwoofer is only engaged when setting to
►
“Downmix 5.1” and “Prologic II”.
During CD playback you can only select “Prologic II” without
►
activated reverb mode.
In menu item
SPDIF Setup
you set the properties for SPDIF signal output
(SPDIF-RAW/SPDIF-PCM).
In menu item
Dolby Digital Setup
you set the stereo or different mono
playback modes. Here you also set the dynamic range.
Summary of Contents for DVD 4620 HC
Page 3: ...Location of Controls Übersicht Bedienelemente und Anschlüsse 3 ...
Page 56: ......
Page 57: ......
