English
42
Starting Up
First turn the unit on with the main switch (14). Later press
(1)
on the unit or POWER on the remote control to turn the unit on
and off.
The display (3) shows HELLO, LOAD and NO DISC.
PLEASE NOTE
After being turned on the unit goes into DVD mode. You can se-
►
lect other signal sources (Radio, USB, AUX) if NO DISC is displayed.
Press SOURCE (unit button (11), remote control button (23)).
Turn your TV set on and select the correct video mode, i.e. cor-
responding to the selected connection (component video, S-video,
etc.).
Set DVD 4620 HC as required.
Settings and access of the settings is described in chapter Menus.
Picture settings are described under
General Setup Menu
in point
TV
Display
and in menu
Video Setup
.
Operation
Following remote control buttons have the same meaning for all DVD
4620 HC functions:
Press POWER (1) to turn the unit on/off.
■
Press MUTE (26) to mute the sound; press again to unmute.
■
Use the numeric buttons (4) to enter chapter numbers, station
■
frequencies, etc. Numbers greater than 10 enter with 10+ (5),
repeatedly if necessary.
Press VOLUME (24) to increase (+) or decrease (-) the volume.
■
Press CHANNEL (22) to change the volume setting for each channel.
■
Press
■
REV,
FWD (18, 17) for fast forward/ rewind functions
(movie, music, station search).
Press
■
CH+,
CH- (31, 32) in playback mode (movie chapter,
music title, station preset) to skip forward/back.
Press SOURCE (23) to select a signal source: DVD, Radio, AUX IN.
■
Press SETUP (6) in DVD mode to access the settings menu (see
■
chapter Menus).
Press PROLOGIC II (29) to activate/deactivate the Prologic settings.
■
Turn Unit On
Settings
Generally Valid Buttons
Summary of Contents for DVD 4620 HC
Page 3: ...Location of Controls Übersicht Bedienelemente und Anschlüsse 3 ...
Page 56: ......
Page 57: ......
