48
Themen
Select „Video Out“ from the menu „Video“. Here you can change the settings
„S-Video“, „Component“, „RGB“ and „P-Scan“ on the playback device that you
have connected. Please see the operating instructions of the connected device
for the correct setting.
SCART
SCART transmits not only video and audio data, but also switching signals.
For this you should use a fully wired Scart cable (21-pole).
1.
Plug the SCART jack fi rmly into the socket on the back of the player.
2.
Plug the SCART jack into the corresponding socket on your playback
device.
NOTE:
You can also use the SCART socket as the audio output. If necessary you
should use a corresponding adapter cable.
Component Video
Connection using a Component Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1.
Plug each of the three jacks into the corresponding sockets on the DVD-
Player.
2.
Plug the jacks into the corresponding socket on your playback device.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1.
Plug the S-Video jack into the socket on the back of the player.
2.
Plug the S-Video jack into the corresponding socket on your playback
device.
Composite-Video
Composite-Video is used to transmit both Video data.
1.
Plug the Composite-Video jack into the socket on the back of the player.
2.
Plug the Composite-Video jack into the corresponding socket on your
playback device.
Fig. 2/22
Fig. 2/16
Fig. 2/19
Fig. 2/17
Starting up
DVD4612HC_GB.indd 48
DVD4612HC_GB.indd 48
14.09.2007 14:45:08 Uhr
14.09.2007 14:45:08 Uhr
