46
Themen
1.
Attach the foot as shown.
2.
Screw the foot on to the bottom of the device.
3.
Then attach the wooden foot.
4.
Place the player on a stable, heat resistant, horizontal and level surface.
Keep a distance of at least 10 cm from walls and objects.
5.
Connect the device to a properly installed power socket.
It is also possible to install this device on the wall. In order to do so, please
proceed as follows:
NOTE:
• To install the device on the wall it must be ensured that there is a socket
within reach of the power cable.
• The socket must be within easy reach so that in case of emergency the
mains plug can be quickly removed.
ATTENTION:
• Please ensure that the installation wall is able to support the load
(at least 20 kg).
• Select the screws/rawlplugs accordingly (not supplied).
1.
Screw the brackets to the wall at the right distance apart.
2.
Then attach the device as shown.
3.
Now connect the device to a correctly installed power socket.
Setting up
Wall Installation
Remote control
battery installation
Setting up and connecting
DVD4612HC_GB.indd 46
DVD4612HC_GB.indd 46
14.09.2007 14:45:06 Uhr
14.09.2007 14:45:06 Uhr
