Step 1
Turn off the oven and wait un‐
til it is cold.
Step 2
Pull the front of the shelf sup‐
port away from the side wall.
Step 3
Pull the rear end of the shelf
support away from the side
wall and remove it.
2
1
Step 4
Install the shelf supports in
the opposite sequence.
The retaining pins on the tele‐
scopic runners must point to
the front.
13.3 How to use: Pyrolytic
Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as this
function. It can cause
damage to the oven.
Before the Pyrolytic Cleaning:
Turn off the oven and
wait until it is cold.
Remove all accessories.
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild deter‐
gent.
Step 1
Step 2
Step 3
Turn on the oven.
Press: Menu / Pyrolysis.
Set the cleaning mode. Press:
.
Option
Cleaning mode
Duration
Quick
Light cleaning
1 h
Normal
Normal cleaning
1 h 30 min
Intense
Thorough cleaning
2 h 30 min
When the cleaning starts, the oven door is locked and the lamp is off.
To stop the cleaning before it is completed, turn off the oven.
The oven stays locked until it is cold.
ENGLISH
43