1.
Fill in the water tank with 850 ml of
water and 50 ml of citric acid (five
teaspoons). Turn off the oven and
wait for approximately 60 minutes.
2.
Turn on the oven and set the
function: True Fan + Steam. Set the
temperature 230 °C. Turn it off after
25 minutes and let it cool down for
15 minutes.
3.
Turn on the oven and set the
function: True Fan + Steam. Set the
temperature between 130 and 230
°C. Turn it off after 10 minutes.
Let it cool down and continue with the
removal of the tank contents. Refer to
"Emptying the water tank".
4.
Rinse the water tank and clean the
remaining lime residue in the oven
with a cloth.
5.
Clean the drain pipe by hand in warm
water with soap. To prevent damage,
do not use acids, sprays or similar
cleaning agents.
13.6
Removing and installing
door
The oven door has three glass panels.
You can remove the oven door and the
internal glass panels to clean them. Read
the whole "Removing and installing
door" instruction before you remove the
glass panels.
The oven door may close if
you try to remove the glass
panels before you remove
the oven door.
CAUTION!
Do not use the oven without
the glass panels.
1.
Open the door fully and hold both
hinges.
2.
Lift and turn the levers fully on both
hinges.
3.
Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door
from its seat.
4.
Put the door on a soft cloth on a
stable surface.
www.aeg.com
46