• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Replacing the lamp at the cavity
ceiling:
1.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 570
°F heat-resistant lamp.
4.
Install the glass cover.
Replacing the lamp on the left side of
the cavity.
1.
Remove the left shelf support.
2.
Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cov-
er. Clean the glass cover.
3.
Replace the lamp with a suitable 570
°F heat-resistant lamp.
4.
Install the glass cover.
5.
Install the left shelf support.
12.4
Cleaning the oven door
Removing the door and the glass panels
You can remove the oven door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove the
door from the appliance. The
door is heavy.
A
A
1.
Open the door fully.
2.
Fully press the clamping levers (A)
on the two door hinges.
3.
Close the oven door to the first
opening position (approximately 70°
angle).
4.
Hold the door with one hand on
each side and pull it away from the
appliance at an up angle.
5.
Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
36 www.aeg.com
Summary of Contents for BP7304001
Page 1: ...BP7304001 EN User manual ...
Page 43: ...ENGLISH 43 ...