6.
CLOCK FUNCTIONS
6.1
Clock functions table
Clock function
Application
TIME OF DAY
To set, change or check the time of day.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates.
TIME DELAY
To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MIND-
ER at any time, also when the appliance is off.
6.2
Setting the time. Changing
the time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until starts to flash.
6.3
Setting the DURATION
1.
Set an oven function and
temperature.
2.
Press again and again until
starts to flash.
3.
Press or to set the DURATION
time.
The display shows
.
4.
When the time ends,
flashes and
an acoustic signal sounds. The
appliance deactivates automatically.
5.
Press any button to stop the acoustic
signal.
6.
Turn the knob for the oven functions
and the knob for the temperature to
the off position.
6.4
Setting the END
1.
Set an oven function and
temperature.
2.
Press again and again until
starts to flash.
3.
Press or to set the time.
The display shows
.
4.
When the time ends,
flashes and
an acoustic signal sounds. The
appliance deactivates automatically.
5.
Press any button to stop the signal.
6.
Turn the knob for the oven functions
and the knob for the temperature to
the off position.
6.5
Setting the TIME DELAY
1.
Set an oven function and
temperature.
2.
Press again and again until
starts to flash.
3.
Press or to set the time for
DURATION.
4.
Press .
5.
Press or to set the time for
END.
6.
Press to confirm.
www.aeg.com
10
