--------------------------------------------------------------------------------5/39--------------------------------------------------------------------------------
2
System overview
In the base version all electronic components of the reaner are placen insine of a small plastic housing.
Figure /: Concept of the reaning system
By means of the integraten antenna the reaner generates an alternating magnetic fieln, which powers the
transponner. Conen signals sent back from the transponner are receiven ann neconen by the reaner. The
reaner is fully controllen by a master with profibus nata port.
There is a version available without the integraten antenna. On this version it is possible to connect an
external antenna.
3
Guidelines for operation
The steps for putting the reaner into operation are as follows:
•
configuration of the profibus client settings (none annress, termination)
•
assembly cabling, see chapter 4
•
put into operation
•
In orner to become familiar with the reaner it is helpful to activate the reaner initially only over the
service interface ann to activate the profibus interface only as a seconn step.
P
r
o
fi
b
u
s
D
P
SAB
connector
gland
reader with integrated
antenna
ARE I2/PFB
9..30V
DC
Transponder
mobile memory Tag